
SealsHub supplies a 37 x 29 mm black EPDM solar panel gap sealing T-profile for photovoltaic mounting assemblies with compatible gap widths of approximately 22–27 mm. Its 37 mm wide top flange covers the joint, while the hollow barbed stem enables push-in fitting and mechanical retention within compatible mounting openings.
With an overall profile height of 29 mm, this model provides a deeper cross-section for PV installations requiring greater profile depth and coverage across wider gaps.
Made from EPDM rubber, the profile combines flexibility with resistance to UV exposure, ozone, moisture and outdoor weathering. SealsHub supports OEM manufacturing, custom profile development and bulk supply for solar mounting manufacturers, distributors and project buyers. Explore our EPDM Solar Panel Sealing Strips for additional profile dimensions and designs.
• T-Shaped Sealing Profile: The 37 mm top flange covers compatible gaps in photovoltaic mounting assemblies.
• Hollow Barbed Stem: Helps engage the opening and maintain the profile's fitted position.
• 22–27 mm Gap Compatibility: Designed for mounting openings within this approximate width range.
• 29 mm Overall Profile Height: Provides a taller configuration than the 37 x 25 mm model.
• EPDM Rubber Construction: Offers flexibility and resistance to ozone and outdoor weather exposure.
• OEM and Bulk Supply: Supports custom production and volume requirements for commercial projects.
| Item | Details |
|---|---|
| Product Type | Solar Panel Gap Sealing T-Profile |
| Profile Dimensions (W x H) | 37 x 29 mm |
| Material | EPDM Rubber |
| Stem Structure | Hollow Barbed Stem |
| Installation Type | Push-In / Press-Fit |
| Compatible Gap Width | Approx. 22–27 mm |
| Color | Black |
| Supply Form | Roll / Coil |
• Photovoltaic Mounting Rails: Sealing interfaces along solar panel mounting systems.
• PV Support Structures: Gap sealing within photovoltaic mounting assemblies.
• Outdoor Solar Installations: Sealing applications in exposed PV systems.
• Solar Equipment Manufacturing: Component sourcing for mounting system manufacturers and assembly suppliers.
Align the hollow barbed stem with the compatible opening and press the profile evenly into place along its length. Check that the stem is properly engaged and the top flange sits evenly against the intended surface. Verify the opening width, internal geometry and required insertion depth before installation, as fit depends on the mounting design and dimensional tolerances. Sample fitting is recommended for unfamiliar configurations before bulk ordering.
Custom colors, lengths and profiles available upon request.
Q: What gap width is this T-profile designed for?
A: It is designed for compatible gap widths of approximately 22–27 mm. Actual fit depends on the opening's internal dimensions and geometry.
Q: How does the 37 x 29 mm model differ from the 37 x 25 mm version?
A: Both models have a 37 mm profile width. The 37 x 29 mm version has a 29 mm overall height, compared with 25 mm for the 37 x 25 mm model, and is specified for a wider compatible gap range.
Q: How is this EPDM T-profile installed?
A: It uses a push-in fitting method. Align the hollow barbed stem with the opening and press it evenly into place.
Q: Does this profile require adhesive backing?
A: No. It is designed for mechanical push-in installation without standard adhesive backing.
Q: Can SealsHub supply this profile for OEM and bulk orders?
A: Yes. OEM manufacturing, custom profile development and bulk supply are available for solar mounting manufacturers, distributors and project buyers.
Explore other SealsHub EPDM solar panel gap sealing T-profiles with hollow barbed stems in different sizes and gap ranges.
{{commentStat.total}} Revirews

{{item.comments}}