
SealsHub supplies a 39 x 22 mm black EPDM solar panel gap sealing T-profile for photovoltaic mounting assemblies with compatible gap widths of approximately 22–28 mm. Its 39 mm wide top flange provides broad coverage across the joint, while the hollow barbed stem supports push-in installation and mechanical retention within compatible mounting openings.
With an approximate wall thickness of 2 mm, this profile combines a defined cross-section with the flexibility required for fitting and sealing in PV mounting systems.
Made from EPDM rubber, the profile offers resistance to UV exposure, ozone, moisture and outdoor weathering. SealsHub supports OEM manufacturing, custom profile development and bulk supply for solar mounting manufacturers, distributors and project buyers. Explore our EPDM Solar Panel Sealing Strips for additional profile dimensions and designs.
• 39 mm Profile Width: Provides a broad top sealing surface across compatible photovoltaic mounting gaps.
• Hollow Barbed Stem: Helps engage the opening and maintain the profile's fitted position.
• Approx. 2 mm Wall Thickness: Provides a defined wall construction while retaining profile flexibility.
• 22–28 mm Gap Compatibility: Designed for compatible openings within this approximate width range.
• EPDM Rubber Construction: Offers resistance to ozone and outdoor weather exposure.
• OEM and Bulk Supply: Supports custom production and volume requirements for commercial projects.
| Item | Details |
|---|---|
| Product Type | Solar Panel Gap Sealing T-Profile |
| Profile Dimensions (W x H) | 39 x 22 mm |
| Material | EPDM Rubber |
| Wall Thickness | Approx. 2 mm |
| Stem Structure | Hollow Barbed Stem |
| Installation Type | Push-In / Press-Fit |
| Compatible Gap Width | Approx. 22–28 mm |
| Color | Black |
| Supply Form | Roll / Coil |
• Photovoltaic Mounting Rails: Sealing interfaces along compatible solar panel rail assemblies.
• PV Support Systems: Gap sealing within photovoltaic mounting structures.
• Outdoor Solar Installations: Sealing components for exposed PV mounting assemblies.
• Solar Mounting Equipment Production: Component sourcing for manufacturers and system integrators.
Align the hollow barbed stem with the compatible opening and press the profile evenly into place along its length. Check that the stem is properly engaged and the top flange sits evenly against the intended surface. Verify the opening width, internal geometry and required insertion depth before fitting, as actual compatibility depends on the mounting design and dimensional tolerances. Sample fitting is recommended for unfamiliar configurations before bulk ordering.
Custom colors, lengths and profiles available upon request.
Q: What gap width is this T-profile designed for?
A: It is designed for compatible gap widths of approximately 22–28 mm. Actual fit depends on the opening's internal dimensions and geometry.
Q: What is the specified wall thickness?
A: The nominal wall thickness is approximately 2 mm.
Q: How is this EPDM T-profile installed?
A: It uses a push-in fitting method. Align the hollow barbed stem with the compatible opening and press it evenly into place.
Q: Does this profile require adhesive backing?
A: No. It is designed for mechanical push-in installation without standard adhesive backing.
Q: Can SealsHub manufacture this profile to custom requirements?
A: Yes. OEM manufacturing, custom profile development and bulk supply are available for customized production and recurring procurement.
Explore other SealsHub EPDM solar panel gap sealing T-profiles with hollow barbed stems in different sizes and gap ranges.
{{commentStat.total}} Revirews

{{item.comments}}